Handling Spills and Stains : Wipe immediately with a clean, damp, lint-free cloth, followed by a dry cloth to prevent water stains on the wood surface. Avoid using chemicals.Avoid Corrosive Chemicals : Use cleaning products specifically for wood or mild soapy water. Wipe along the wood grain and follow with a dry cloth. For rough finishing: Avoid synthetic fabrics, wool, or tissues that might leave fibers on the surface. Use a clean cloth or soft brush with water or a suitable cleaner, then dry thoroughly.Preventing Scratches : Avoid scraping, scratching, or contact with hard, sharp objects. Use coasters or protective pads, and lift objects instead of dragging them across the furniture surface.Protection from Environmental Damage : Furniture should be placed indoors. Exposure to direct sunlight and moisture from rain can cause fading and mold. Periodic maintenance: Check frequently for cracks and ensure screws and nuts are tight. If not in use for a long period, cover with a clean cloth to prevent dust.

Daily Dusting: Vacuum weekly with a soft brush attachment to remove dust and dirt. For woven surfaces, gently brush along the weave direction.Handling Spills & Stains: Immediately blot with a clean, dry, lint-free white cloth. For spot cleaning, use mild soapy water or a water-based upholstery cleaner. Wipe gently in the direction of the weave. Do not rub, as this drives stains deeper and may cause fibers to pill.Avoid Harsh Chemicals: Do not use bleach, strong solvents, or abrasive cleaners, as they can damage the fabric and UV resistance of the fibers. Always test any cleaner in an inconspicuous area first. Avoid soaking the fabric to protect the inner foam.Drying: If wet, blot excess moisture with a dry cloth and allow to air dry naturally in a shaded, well-ventilated area.

General Cleaning : Use a soft cloth or sponge with warm soapy water. Rinse with clean water and dry. For stubborn stains like food, tea, or coffee, apply a paste of baking soda and water, leave it on, scrub gently, and rinse off.Preventing Damage : Avoid corrosive cleaners, bleach, or acidic products (like vinegar or lemon) as they can damage the glaze's shine. Avoid hard impacts and wipe up liquid spills immediately, especially acidic ones.

Cleaning Stains : Use mild soapy water or a degreaser for heavier stains. Wipe with a soft cloth, rinse with clean water, and dry completely to prevent water spots. If stainless steel rusts, use a specific stainless steel cleaner. For powder-coated iron, use a non-corrosive cleaner.Preventing Damage : Avoid sharp scouring pads or harsh chemicals like bleach or hydrochloric acid. Always use a soft cloth for stainless steel, and for powder-coated iron, avoid dragging hetavy objects across the surface to prevent scratches or chipping.Maintenance : Always wipe dry after cleaning to prevent rust. For stainless steel, apply a stainless steel polish following the grain. For powder-coated iron, use a fine polish to restore shine, but avoid wax as it attracts dust.

General Cleaning : Wipe the brass-painted legs with mild soapy water and a soft cloth. For tarnished spots, you can use a dedicated brass cleaner or a mixture of baking soda and lemon juice to scrub gently, then rinse and dry completely.Preventing Damage : Avoid using abrasive scouring pads and harsh chemicals. Dust regularly, and you can apply a protective lacquer or wax to reduce tarnishing.Maintenance : Always dry the brass completely after cleaning to prevent water spots..